Elektrik ve Elektronik > Devre Tasarım ve Üretimi
SENSÖR YARDIMI İLE SARKAÇ PERİYOT BULMA
Proje ID: #760
|
Bütçe: Belirtilmemiş |
Süre: Belirtilmemiş |
Yayın: 3350 gün önce
|
Rapor : Evet
https://phet.colorado.edu/pt/simulation/legacy/pendulum-lab linkinde ki java yı çalıştırıp photogate timer ı aktive eder iseniz yapılması gereken projenin similasyon halini görebilirsiniz. detaylı bir fikir verebilir. İlgilenenler ile mesaj ile daha detaylı bir anlatım yapabilirim.
Title: Electronic timer for a "simple pendulum" experiment
Overview of the project
The acceleration due to gravity (g) can be measured by timing the period of a pendulum. In a "simple pendulum" experiment timing the period using a hand-held stopwatch can introduce large uncertainties. In this project the student will design and manufacture an electronic timer capable of measuring periods to an accuracy of at least a millisecond. The passing of a "simple pendulum" bob is to be detected by an LED emitter/detector pair or similar suitable device. The timer will count 'n' swings (where 'n' is input by the user) and output results on an LCD.
Specific components/tools
Simple pendulum, PIC, LEDs, three buttons to input [+] [-] [start/stop], LCD to output [number of swings (3 digits)] ["working"/"done"/"stopped"] [total period in milliseconds].
bir sarkaçın periyotunu bulmak bu projede ki hedefimiz.(sensör kullanarak) ardinio yada pıc in ekranında 1. , 2. , ve 3. periyotları görmemiz gerekli. periyotları milisaniye cinsinden görmemiz gerekli. bilgisayarda yapılmış bir similasyona gerek yoktur. ardinuo yada pıc üzerinde sonuçları görmemiz yeterlidir. Title: Electronic timer for a "simple pendulum" experiment
Overview of the project
The acceleration due to gravity (g) can be measured by timing the period of a pendulum. In a "simple pendulum" experiment timing the period using a hand-held stopwatch can introduce large uncertainties. In this project the student will design and manufacture an electronic timer capable of measuring periods to an accuracy of at least a millisecond. The passing of a "simple pendulum" bob is to be detected by an LED emitter/detector pair or similar suitable device. The timer will count 'n' swings (where 'n' is input by the user) and output results on an LCD.
Specific components/tools
Simple pendulum, PIC, LEDs, three buttons to input [+] [-] [start/stop], LCD to output [number of swings (3 digits)] ["working"/"done"/"stopped"] [total period in milliseconds].
SENSÖR YARDIMI İLE SARKAÇ PERİYOT BULMA

Proje Sahibi : bugraisik
2928 gün önce
Güven Puanı : 100
1 proje girişi
|
1 işlemli
|
0 ödeme yapılmayan
Proje ile ilgili soru sor
Henüz proje ile ilgili soru sorulmamış
Projeye 8 adet teklif verilmiş
8 teklif
(Ort: 482TL)
enginsuba.. (0)
0 Puan
mhoca (1)
1 Puan
stlg (134)
4.7 Puan
devremati.. (73)
4 Puan
bilpaylas (3)
3.7 Puan
EODProduc.. (1)
5 Puan
MikroStar (0)
0 Puan
Hunkar_CI.. (5)
4.7 Puan