Xilinxte trafik lambası yapımı
Proje ID: #1689 | Bütçe: Belirtilmemiş | Süre: Belirtilmemiş | Yayın: 1525 gün önce | Rapor : Hayır
Your task in this project is to design and simulate a traffic light controller. You should follow the given
hierarchical design below, but you will be required to design each component on your own. You can
use counters and comparators as blocks but you should design your own counter and comparator
Consider the crossroad in Figure 1. Your task is to design a traffic light controller for this crossroad.
In each road, there are counters and traffic lights. Traffic lights work with your design outputs, i.e.,
when you give ‘1’, it means it is green, and when you give ‘0’, it means it is red.
The main road is ‘1‘, i.e. traffic density is very high in this road, and you need to design a controller
such that it prevents the traffic jam in this crossroad.
Please ensure the following rules for the controller:
The number of cars in each road will be given to you as binary inputs. You donot need to
count the number of cars.
We have a threshold, ‘10‘, for the number of cars in the main road. If the number of cars in the
main road is above this threshold, the light in the main road should be green, even if the number
of cars in road II is larger than the number of cars in the main road.
If the number of cars in the main road is below the threshold, the light in the road with more
cars should be green. If the numbers are equal, the main road should be green. The green light
should be green till all cars in the associated road leave the crossroad, and then the other light
should change to green. When all cars leave the crossroad, the light in the main road should be
You need to design a counter/counters such that it/they will count down with a 1 Hz clock, if the
light in this road is green, i.e., only one car can leave the crossroad in 1 sec. The upper limit for
the counter is ‘31‘(inputs are also two 5 binary numbers).
You need two comparators such that one of them will compare the number of cars in the main
road with the given threshold, and the other will compare the number of cars in roads I and II.
Please keep in mind that you need to update the counter/counters values with the input. You can
use multiplexers for this objective.
• Working implementation: 40%
• Demo: 30%
• Report: 30%.
Please note that you are expected to design by using minimum number of gates.
Boğaziçi elektrik elektronik 1. Sınıf
Xilinxte trafik lambası yapımı - Elektronik Devre Projeleri
Proje Sahibi : Baskan24
1523 gün önce
1 proje girişi | 0 işlemli | 0 ödeme yapılmayan
Henüz proje ile ilgili soru sorulmamış